|
|
SUNNIK STANDARD PRIMER COATED SECTIONAL TANKS
|
|
Manufacturing Specifications |
|
General Application : |
|
Standard Primer Coated Sectional Tank is a basic and economic water storage for general purpose. |
|
Standards : |
|
‘Sunnik’ Standard Primer Coated Sectional Tank (rectangular) constructed with hydraulically pressed flanged panels conform to British Standard 1564: 1949 & 1975. Internal coated with non toxic bituminous paint and external with red oxide primer. |
|
Materials : |
|
The mild steel used in the manufacture of the plates, stays, cleats, and pads for installation conform to the requirement of B.S.4360 grade 43A |
|
Flanges of Panels : |
|
The plates are pressed with a combined double flanged at an angle of 45º and 90º to the face of the plate on all four sides. |
|
Stays and Cleats : |
|
The sides and ends of all tanks shall be braced by stays to ensure rigidity of the tank, up to the maximum operating water level. The stays shall be made from mild steel angles. Cleats are made from mild steel plates. |
|
Washers, Bolts & Nuts : |
|
Hexagonal bolts, Studs, Nuts and Washers conform to B.S. 4190. |
|
Joining Compounds : |
|
Non-Toxic, odourless rubber bitumen sealarstrips and bitumen compound or equivalent shall be supplied. |
|
Covers : |
|
Covers for Standard Primer Coated Sectional Tank are supplied to suit individual requirements either flat or pitched curved, welded, or bolted. Manhole and insect proof vent to be provided as standard. |
|
Ladders : |
|
Ladders identical to tank finishes are provided unless specified by buyer on other finishes |
|
Level Indicator : |
|
Mechanical level indicators are similar to panel finish painted in yellow gloss paint with black marking complete with PVC float, cable and pointer with reverse reading system. |
|
|
| B.S.1564 : 1975 (Revised) – For cold liquid with density of 1.0 and having temperature not exceeding 38°C. |
| |
Tanks 4 FT. Height – Bottom, sides and ends. 5mm
Tanks 8 FT. Height – Bottom, sides and ends. 5mm
Tanks 12FT. Height – Bottom, sides and ends. 5mm
Tanks 16FT. Height – Bottom and first tiers of sides and ends. 6mm
Second, third and top tiers of sides, and ends.5mm |
|
Notes:
- Manufacturing specifications are subject to change without prior notice.
- Manufacturing specifications can be customized but subject to manufacturer’s approval and safety
standards.
- It is recommended all Standard Primer Coated Sectional Tank shall be installed by our approved
installers only
|
|
|
|
|
|
 |
Email: enquiry@sunnik.com.my |
Fax: +603 - 9075 3333 (24hrs) |
Customer care: +603 - 9074 8888 |
|
|
